FLSun T1 Professional: Overview
Firstly, let’s check out the general specs of the FLSun T1 Professional.
The glossy trying machine (pictured beneath) presents a 260*330 mm construct quantity inside its enclosed chamber. In response to FLSun, the inside of the chamber can attain as much as 50C, due to the passive heating from the warmth mattress.
The enclosed chamber and nozzle (able to melting plastic as much as 300C) is able to printing a wide range of supplies together with PLA, ABS, PA, TPU, and extra. For our evaluate, we’ve got tried PLA, and ABS+ (extra on that later).
Working on Klipper, the machine will be managed remotely out of your laptop over WiFi, in addition to through the touchscreen interface on the printer itself.
The printer is available in a semi-assembled state, and requires possibly an hour of labor to get all of it put collectively and up-and-running. As soon as the machine is assembled, it measures XXXXX, and weighs some YYY kg.
The T1 Professional comes with the next options:
- Extremely-fast print pace: The T1 Professional operates at as much as 1000mm/s with 30000 mm/s² acceleration. It prints fashions in half the time in comparison with rivals. A Benchy will be printed in about 10 minutes.
- Low-noise printing atmosphere: The T1 Professional employs a CAPA silent turbine fan, self-developed core motherboard, and optimized firmware, lowering noise from 78dB to 55dB throughout high-speed printing, in comparison with the earlier T1 mannequin.
- Improved print high quality: The T1 Professional addresses earlier points like salmon pores and skin and poor adhesion by introducing new core algorithms, resembling vibration compensation and enhanced automated leveling methods.
- Absolutely automated leveling: The T1 Professional measures a number of predefined factors on the print mattress utilizing weight sensors to gather top knowledge, eliminating guide leveling and making the method simpler for customers.
- Enter shaping algorithm: This function minimizes vibration results, leading to clean and flawless mannequin surfaces, notably helpful when printing advanced or intricate designs.
- Twin-gear short-distance extruder: The extruder’s coaxial gears provide higher precision and extrusion pressure, resulting in extra constant materials circulate and improved total print efficiency.
- Filament detection improve: The improved filament detection system reduces print failures as a consequence of materials depletion. An optimized algorithm filters unstable alerts from high-frequency filament oscillations throughout ultra-fast printing, guaranteeing correct filament-out alerts.
Moreover, the FLSun T1 Professional comes with the most recent launch of their slicing software program, FLSun Slicer 2.0. The brand new slicer options one-click slicing for wonderful print high quality and a redesigned person interface that simplifies human-computer interplay, lowering the training curve. The optimized slicing path improves printing pace, whereas the cross-hatch filling path adjustment enhances mannequin high quality. The “Z-Carry Threshold” function successfully controls stringing in particular filaments, and the added most quantity limitation function is tailor-made to the T1 Professional mannequin.
The FLsun firmware OS has additionally undergone a complete improve, bettering responsiveness and smoothness. Wi-Fi transmission charges have been enhanced for extra secure connections, and storage for time-lapse pictures is optimized for effectivity. The person interface has additionally been refined for a extra intuitive expertise.
Unpacking and Meeting
The FLSun T1 Professional is available in a single field, with the primary parts already assembled.
These embrace the bottom (with heater and mattress) and the highest lid (with finish stops and different digital components. Additionally included are three structural pillars (every with a stepper motor and delta arm) and the enclosure panels (2 acrylic facet panels and a glass door). The extruder and sizzling finish can be within the field, in addition to a touchscreen, a couple of primary instruments, and a few luggage of screws.
You’ll be able to see these things within the picture beneath.
Establishing is comparatively straightforward, though becoming the extruder to the arms is a little bit bit fiddly.
General it took me round an hour to assemble the entire unit, which when assembled, appears to be like like this:
Printing with the FLSun T1 Professional
A small amount of PLA filament was included within the field, and on the 3D printer’s reminiscence (3Gb), there will be discovered a wide range of STL recordsdata so you will get printing instantly.
In response to FLSun, these fashions have a excessive first print success fee of 99%, however this declare does appear to use primarily to fashions printed in PLA (extra on this matter later).
Fashions will be loaded onto the printer through the included USB stick, or will be beamed to the machine through WiFi utilizing the FLSun Slicer 2.
Earlier than my first print, I adopted the directions and carried out the automated vibration compensation and mattress leveling processes. This was easy and automated, and took round 5 minutes. After they had been full, I used to be able to print.
I opted for the Benchy, and certain sufficient, the primary layer caught to the print mattress no drawback. Naturally, the primary layer just isn’t printed at full pace, however as soon as the printer moved as much as the subsequent layer, I used to be blown away by the pace of this factor.
It was so quick, I actually laughed out loud to myself. I went to the kitchen to pop the kettle on and once I bought again a few minutes later, the mannequin was already taking form and was nearly 25% full.
I made a decision to cancel the Benchy print at this level and take a look at one thing else. Everybody is aware of what a Benchy appears to be like like, and so they’re kinda boring at this level.
I had a print job ready for a shopper, so I made a decision to attempt that. This explicit object has a 3D lattice (designed in Sulis) inside so I wished to see how this printed. The merchandise must be light-weight and have floor end, so it appeared like a really perfect job for the printer. I sliced my file right into a cross part, so I might view the lattice inside, and commenced the print.
The result’s beneath, and I used to be pleased with the pace of the print, the floor end, and the standard of the lattice inside.
OK, so it prints quick with PLA, and it appears to don’t have any points with mattress adhesion.
What about with ABS+? The FLSun T1 Professional has an enclosed chamber so would possibly as nicely attempt some trickier supplies, proper? Proper.
For the ABS+, I used the “cat” STL that was pre-loaded on the machine. On my first try with the ABS+, there was no mattress adhesion in any respect. Ditto the second try.
I elevated the temperature of each the nozzle and the mattress to 255C and 80C respectively, and did an auto mattress degree once more. The primary few layers began printing effective, so I left my home briefly to go to the native grocery retailer to purchase lunch.
To my shock, once I returned there was already a plate of spaghetti ready for me (and never the nice type)! The primary few layers had printed, after which the mannequin had shifted on the mattress, ensuing within the nozzle extruding molten filament into skinny air.
After a pair extra makes an attempt, I gave up and went to buy some glue stick. After making use of a little bit of glue to the print mattress and making an attempt once more, the mannequin was printed on the primary try.
You’ll be able to see the timelapse of the print within the video beneath.
I personally would advocate using a glue stick or different mattress adhesive for many 3D printers anyway, no matter how the mattress is coated. On this case, the mattress appears to be a PEI coated metal plate, which is hooked up magnetically to the warmth mattress.
The concept that there’s a common print mattress floor that works for all filaments, appears to me to be one thing of a fantasy. Even on a $200,000 industrial printer, they alter the print mattress sheet in response to no matter filament is getting used. So, for PLA, we will say that this print mattress is totally effective – however for ABS+ at the very least, you’ll undoubtedly want some glue.
As for different filament supplies, that is nonetheless to be decided on my half.
Abstract
The FLSun T1 Professional is a perfect selection for customers searching for quick, environment friendly, and dependable 3D printing. With ultra-high speeds of as much as 1000mm/s, it reduces printing time by half whereas sustaining wonderful high quality.
The quiet operation and improved print options, resembling vibration compensation and automated leveling, make it extremely user-friendly. Moreover, the T1 Professional presents superior filament detection, dual-gear extrusion, and a redesigned slicing interface for enhanced efficiency. Whether or not printing advanced fashions or utilizing a wide range of filaments, this printer delivers constant outcomes, making it a beneficial device for any mission.
The T1 Professional launches on October 25, 2024, at 10:00 PM Beijing Time, with an early chook worth of $399 (repeatedly $500) obtainable till November 3. You’ll be able to safe this restricted provide right here.
Heads up: our content material might comprise affiliate hyperlinks. In the event you purchase one thing by way of a kind of hyperlinks, you gained’t pay a penny extra, however we’ll get a small fee. Learn extra right here.FLSun T1 Professional
This glossy trying machine presents a 260*330 mm construct quantity inside its enclosed chamber.
- – Print measurement: 260(D) x 330(H) mm
- – comes with enclosure
- – totally automated leveling
- – Twin-gear short-distance extruder