Chinese language 3D printing expertise agency SUNLU has launched a brand new filament drying system designed to supply extra flexibility for 3D printing customers managing a number of spools.
Known as the FilaDryer SP2, the unit separates its heating base from the drying chambers, permitting as much as three chambers to be stacked vertically. This setup is aimed toward customers working a number of printers directly, the place area is restricted and filament drying usually turns into a bottleneck.
Based in 2013 in Zhuhai, China, SUNLU makes a speciality of 3D printing supplies and {hardware}, with a product vary that features filaments, resins, and equipment. Having bought greater than 25 million items, the corporate runs over 140 manufacturing strains and holds over 200 granted IP rights associated to supplies and tools design.
Scalable design with environment friendly drying
One of many key targets behind the SP2 is to enhance drying effectivity. In repeated assessments with PETG, the system introduced moisture ranges down from 0.6% to 0.2% in simply 4 hours. That’s round 30% quicker than different dryers in the identical class. The adjustable temperature vary, which runs from 35°C to 70°C, makes it appropriate for frequent supplies like PLA in addition to moisture-sensitive filaments similar to nylon.
Every chamber features a built-in humidity sensor for real-time monitoring and presents sufficient area to carry both two 1kg spools, a single 2–3kg spool, or spools measuring as much as 250 mm in diameter and 153 mm in width. The beneficiant capability is particularly helpful throughout lengthy print jobs, the place smaller dryers usually fall quick. In a single instance, saturated PLA reached optimum moisture ranges inside 4 to 6 hours at 55°C, demonstrating the system’s effectiveness for prolonged use circumstances.
Security options are constructed into the SP2’s design. It makes use of a ceramic PTC heater mixed with a wise fan to make sure warmth is evenly distributed. A mechanical cutoff change prompts if temperatures spike unexpectedly, whereas a PID-controlled microprocessor retains the system secure inside a one-degree vary.
The gadget has handed 72-hour steady operation assessments and was additionally run by high-stress situations to verify reliability. Extra silicone gaskets at connection factors assist hold moisture out and keep constant drying situations.
In comparison with typical dryers, that are usually fastened in design and restricted to a single chamber, the SP2 presents a extra scalable resolution. As an alternative of buying a wholly new unit, customers can increase capability by including further chambers. It additionally accommodates smaller spools with out the necessity for adapters or modifications.
Moreover, inner testing signifies as much as 35% decrease power consumption than comparable merchandise. In early use, the system has additionally been famous for its quiet operation at 42dB, secure stacking, and constant temperature management throughout prolonged periods.
Technical specs and pricing
For pricing particulars and extra data, readers can go to Sunlu’s web site.
| Product Identify | SUNLU Filament Dryer SP2 / Storage Field Set |
| Product Dimension | 278mm × 208mm × 396mm (L x W x H) |
| Inside Dimensions | 265mm × 193mm × 274mm (L x W x H) |
| Bundle Dimension | 337mm × 263mm × 380mm (L x W x H) |
| N.W. | FilaDryer SP2 Set: 3.6KG, Storage Field Set: 5.0KG |
| G.W. | FilaDryer SP2 Set: 4.1KG, Storage Field Set: 5.5KG |
| Working Setting | Temperature: 10°C-35°C, Relative Humidity: ≤95% |
| Suitable Filament Diameters | Φ1.75mm/Φ2.85mm |
| Most Spool Dimension | Φ250mm × 153mm (1kg × 2 or 2kg × 1 or 3kg × 1) |
| Work Temperature Vary | 35°C-70°C (PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC and many others.) |
| Humidity Show Vary | Check with the Hygrometer: 10%-90% |
| Time Setting Vary | 0-99h |
| Energy Enter Specs(Make sure the voltage matches your native provide earlier than use) | AC 110V 60Hz 0r AC 220V 50Hz |
| Most Working Present | 2.2A@230V, 4.2A@120V |
| Most Working Energy | 250w |
| Stand by Energy | ≤1W |
| Bundle Contents: FilaDryer SP2 Set | Storage Field *1, Heating Base *1, Hygrometer *1, Desiccant *1, Desiccant Field *1, Energy Cable *1, Spool Curler *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, Person Handbook *1 |
| Storage Field Set | Storage Field *1, PLA+2.0 Black *2, Hygrometer *1, Desiccant *1, Desiccant Field *1, Spool Curler *1, Air lock *2, PTFE Tube 8cm *2, PTFE Tube 1m *2, Person Handbook *1 |
Take the 3DPI Reader Survey — form the way forward for AM reporting in underneath 5 minutes.
What 3D printing tendencies do you have to be careful for in 2025?
How is the way forward for 3D printing shaping up?
To remain updated with the most recent 3D printing information, don’t overlook to subscribe to the 3D Printing Trade e-newsletter or observe us on Twitter, or like our web page on Fb.
Whilst you’re right here, why not subscribe to our Youtube channel? That includes dialogue, debriefs, video shorts, and webinar replays.
Featured picture reveals the Sunlu FilaDryer SP2. Picture through Sunlu.