Idefix

Idefix, a cartoon character within the French comedian ebook collection The Adventures of Asterix.

Idefix, also referred to as Dogmatix, is the one animal among the many primary characters of the collection. He serves primarily as a 'bone' of competition between Asterix and Obelix as as to if he needs to be allowed to accompany them on their adventures.

Helps ARE required on one half solely, physique. See notes for particular useful printing ideas.

If in case you have the correct filament colours, no portray is required.

The assembled mannequin is 75mm tall and is usually in proportion to my beforehand posted unique Asterix and Obelix cut up fashions

Necessary observe
It is a shade cut up mannequin utilizing the unique mannequin of Idefix kind Cults3D as a place to begin:

https://cults3d.com/en/3d-model/artwork/idefix-nachorope-2

The unique designer, NachoRoPe, agreed to my request of doing the cut up and posting it underneath my account in addition to his:

NachoRoPe, https://cults3d.com/en/customers/NachoRoPe

Take pleasure in!

……………………………………………………………………………………………..

Particular shoutout to maker Benoît Lussier for offering QA printing and high quality suggestions.

Particular due to Jason McMillan (makerworld ID Gatekeeper) for creating the Bambu Print Profile on Makerworld.
……………………………………………………………………………………………..

Print Directions:
Helps: YES on one half solely, physique, see particular directions under
Decision: .2mm
Infill: 15%

Notes:**

Check with the notes under for a couple of useful printing and meeting directions.

……………………………………………………………………………………………..

Constructing the mannequin

Colours

Black: (Satan Designs PLA – Black)
eye_black_right
eye_black_left
eyebrow_right
eyebrow_left
ear_black_right
ear_black_left
nostril
tail
..

White: (Satan Designs PLA – White)
eye_white_right
eye_white_left
physique
..

Bone: (Satan Designs PLA – Beige)
bone_right
bone_left
..

……………………………………………………………………………………………..

Printing and meeting ideas

Printing ideas

1 – Helps are required on one half, physique. Not one of the cut up components want helps.

*helps: natural/tree helps have been used on:
– physique (29 diploma angle)

2 – There are some items which will want brims or rafts, use your discretion. When establishing my prints I favor to be conservative to make sure the least probability of a print failure, particularly because the base of many components are hidden when inserted into one other half.

*I used a raft on the next components to endure a clear match:
– eye_black_right/left
– eyebrow_right/left

3 – I printed the eyebrows, eye_black and the eye_white components with arachne perimeter era with out difficulty, however throughout QA it was decided that these components profit barely through the use of the traditional perimeter era.

4 – When eradicating components from the printer mattress, it's a VERY good concept to put left/proper components into separate containers to assist with the meeting course of. Generally the distinction between the left and proper components may be very small however it’s nonetheless value holding monitor of them and assembling them of their correct place.

..
Meeting ideas:

1 – Take your time gluing the mannequin collectively and benefit from the course of. Give some thought into which components to connect collectively as teams after which gluing the teams collectively. Let the glue for every group set fully earlier than combining teams.

2 – I used 3D Gloop (robust quick drying) and E6000 (cheesy gradual drying) glues to place this mannequin collectively. For each glues utilizing a smaller quantity is normally higher than extra glue.

3 – necessary for all my fashions, make sure to dry match all components earlier than gluing.

4 – The eye_black components are small so I left a variety of wiggle room to place them in. The mattress facet is inserted and observe that there’s a distinction within the higher and decrease components of this piece. The decrease half stands proud just a little bit.

5 – Check with the meeting diagrams within the photos part in addition to the uploaded photos for placing the mannequin collectively. The mannequin is supposed to be glued.

Don’t hesitate to ask questions, suggestions is crucial to creating higher fashions.