💃 Dancing Toothless/Nighfury Meme Cup・ STL File for 3D printing・Cults

Drink like a real dragon rider! Excellent for watching the live-action How To Practice Your Dragon.

📦 Mannequin Options:
Excessive-quality stylized sculpt impressed by the “Toothless Dance” meme.

Separated components: eyes for simpler portray & printing, openable lid with straw gap

Clear geometry with strong, watertight mesh.

Flat backside – good for show or as a novelty cup prop.

📏 Really useful Print Measurement

🎁Show Measurement (Determine / Ornamental Cup)
Top: 140–160 mm
Width: ~80–90 mm (together with arms/tail)
Wall thickness (if hollowed): 2.5–3 mm

🍹Purposeful Prop Cup (Cosplay / Show Use Solely)
Top: 170–180 mm
Inside Diameter (usable house): ~65 mm
Wall thickness: ≥ 3 mm for sturdiness

🧱 FDM (PLA/ABS)

Layer Top: 0.12–0.16 mm
Wall Thickness: ≥ 1.2 mm
Infill: 15–20%
Helps: Required (particularly below the pinnacle and arms)
Orientation: Print the physique upright
Really useful Nozzle: 0.4 mm

🧪 Resin (SLA/DLP)

Layer Top: 0.03–0.05 mm
Regular Publicity: 2–2.5 s (varies by resin)
Helps: Required (use medium and lightweight helps)
Orientation: Print physique at 30–45° angle; separate components horizontally

🎨 Bonus – Ending Ideas:

Portray: Use acrylic paints and seal with a matte varnish to protect the lovable, clear look.

Meeting: Use tremendous glue (cyanoacrylate) for small components, or epoxy/magnets if you would like detachable items.

Clear Resin Results: For shiny eyes or a translucent base, you may print these components in clear resin and paint from the within for a glassy impact.